|
|
Loctite
Range of Products
Loctite Adhesives, Primers
& Lubricants
The following
Loctite products are available from us or can be sourced easily for
further information please contact BC Machinery:
Phone: 08
89721988 or
Email: parts@bcmachinery.com.au
ADHESIVES
401 Ultra Fast Instant Adhesive
| Properties |
Functions
& Benefits |
| High strength,
high performance cyanoacrylate instant adhesive |
Rapid bonding
of metal, plastic, rubber, cork, wood, paper, leather, fabric
etc. |
| Fast fixing
time to 2 to 30 seconds |
Unique chemistry
ensures rapid cure - even on difficult to bond substrates |
| Surface insensitive
grade, ideal for bonding difficult metals |
Low viscosity
assists application and dispensing |
| Low viscosity.
Good chemical resistance |
|
| Temp range
-55°C to +80°C |
|
| Shear strength
- nom. 22N/mm² (3 190psi) |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
406
For Difficult to Bond Substrates
| Properties |
Functions
& Benefits |
| High strength
high performance cyanoacrylate instant adhesive |
High strength,
low viscosity |
| Ideal for
bonding difficult materials |
Rapid bonding
of a wide range of plastics, metals and rubbers |
| Low viscosity.
Excellent chemical resistance |
Bonds difficult
plastics and rubbers - EPDM etc |
| Fast fixturing
time to 2 to 30 seconds |
Very fast
fixturing - even on difficult to bond substances |
| Shear strength
- nom 22N/mm² (3190psi) |
|
| Temp rang
-55°C to +80°C |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
416
High Strength Medium Viscosity
| Properties |
Functions
& Benefits |
| Bonds most
rubbers & plastics |
High Strength,
medium viscosity |
| Excellent
chemical resistance |
Allows more
time for alignment of components |
| Temp Range
-55°C to +100°C |
Can be fillet
cured with Tak Pak Accelerator 7452 |
| Particularly
suitable for bonding irregular or rough surfaces. |
|
| Shear strength
- nom. 22N/mm² (3190psi) |
|
| Complies
with Mil-A-46050C and commercial item listing A-A-3097 Type II
Class III |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
454
Instant Adhesive Gel
| Properties |
Functions
& Benefits |
| Cyanoacrylate
instant adhesive of gel consistency |
Rapid bonding
of metal, plastic, rubber, cork, wood, paper, leather, fabric.
etc. |
| Surface
insensitive - specially formulated to bond difficult substrates |
Unique chemistry
ensures rapid cure - even on difficult to bond substrates |
| Superior
gap filling ability. Temp range -55°C to +80°C |
No run, no
drip - even on vertical surfaces |
| Shear strength
- nom 22N/mm² (3190psi) |
Particularly
suitable for bonding porous substrates |
| Fast fixturing
time of 2 to 30 seconds |
|
| |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
480
Toughened Instant Adhesive
| Properties |
Functions
& Benefits |
| High impact,
high peel and shear strength toughened cyanoacrylate adhesive |
Can replace
welding & rivetting in many applications |
| Bonds metal,
most rubbers and plastic etc |
Particularly
suited for bonding metal to metal, metal to rubber and metal to
plastic |
| Fast fixturing
time of 10 to 120 seconds |
|
| Temp rang
-55°C to +100°C |
|
| Shear
strength - nom 26N/mm² (3770psi) |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
324
Impact Resistant Speedbonder
| Properties |
Functions
& Benefits |
| High impact
resistance, high peel strength, high shear strength |
Typical uses:
Fills gaps to 1mm (0.040").
Bonds combinations of metals, timber and glass |
| Temp range
-55°C to +135°C |
Parts to
autoglass and mirrors to housings |
| Shear strength
- nom 18N/mm² (2610psi) |
Decorative
wood to cutlery |
| Good resistance
to weathering, solvents and oils |
Magnets to
DC motors |
| Use
with Activator 7075. Parts can be handled in 2-5 minutes |
Applications
where impact and peel forces are severe |
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
330
Multibond Adhesive
| Properties |
Functions
& Benefits |
| Cures only
after contact with Multibond Activator 7387 |
Typical Uses:
Handling strength 3 to 5 minutes. Full cure 3 to 6 hours.
Bonding nameplates, trim items, magnets, handles, furniture etc |
| High impact
resistance, peel strength and shear strength |
Bonds combinations
of plastics, metals, timbers and glass |
| Cures through
gaps up to 0.5mm (0.020") |
|
| Temp range
-55°C to +120°C |
|
|
Shear strength - nom 22.5N/mm² (3260psi) |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
3801
5 Minute Epoxy
| Properties |
Functions
& Benefits |
| Fast cure.
Cure commences in 5 minutes. Full cure in 1 hour |
Typical Uses:
Clear colourless bond.
Bonds metal, ceramic, concrete, fibreglass, marble, wood etc. |
| Dispenses
from convenient twin pack syringe |
General
purpose workshop repair |
| High viscosity,
good gap filling formulation |
|
| 100% solids,
non-shrink, solvent free for environmental friendliness |
|
| Temp
range -55°C to +120°C |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
3805
Steel & Aluminium Epoxy Filler
| Properties |
Functions
& Benefits |
| Fast cure,
high strength epoxy |
May be drilled,
filed, tapped or sanded after cure |
| Recommended
for fitting shaft repair sleeves |
Strong
bonds to virtually all metals - especially steel and aluminium.
Also suitable for wood, ceramics and concrete. |
| Temp range
-55°C to +150°C continuous, +175°C intermittent |
Colour coded
to aid complete mixing |
| Heavy paste
for filing large gaps |
Resists
most common household and workshop chemicals |
| Offers
good thermal conductivity |
|
Back
to the Top...
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
PRIMERS
770 PP Primer
| Properties |
Functions
& Benefits |
| Primes
polyolefin and low surface energy substrates to allow bonding |
Use
for bonding Teflon wear strips |
| Suitable
for bonding Teflon, santoprene, polyethlene, polypropylene, Viton,
etc |
Use
to replace thermoplastic welding |
| Fluorescent
under UV light for easy inspection |
Suitable
for electronic and medical device applications |
|
Can
be used with adhesives 401 and 406 |
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
Back
to the Top...
7471
Primer 'T' Replacement
| Properties |
Functions
& Benefits |
| Primer designed
to speed the cure of Loctite anaerobic adhesives and sealants |
Can be used
with threadlocking grades |
| Use
only when accelerated cure speed is required, or in cold weather |
Can
be used with retaining grades |
| General purpose
primer |
|
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
Back
to the Top...
7649
Primer 'N' Replacement
| Properties |
Functions
& Benefits |
| General purpose
primer, assures fast fixturing of parts (15 to 30 minutes) |
Use with: |
| Use
only where accelerated cure speed is required, or in cold weather |
567
Master Pipe Sealant |
| Use for cleaning
excessively oily parts and contaminated components |
565 Pipe
Sealant |
| Use where
gaps exceed normal recommendations |
319 and 326
Speedbonder |
| |
515 and 518
Master Gasker |
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
Back
to the Top...
LUBRICANTS
767
Anti-Seize
| Properties |
Functions
& Benefits |
| General purpose
anti-seize lubricant |
Chain lubricant |
| Protects
metal joints from seizure |
Prevents
galling and corrosion on threads |
| Temp range
-55° to +870°C (1600°F) |
General purpose
workshop use |
| |
Lubricates
slow mowing bearings in hot corrosive environments |
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
Back
to the Top...
771
Nickel Anti-Seize
| Properties |
Functions
& Benefits |
| Premium quality
copper free paste compound |
Reduces
corrosion and seizing due to strong chemicals and weathering |
| Pure
Nickel base |
Well
suited to marine applications for use with stainless steel, aluminium
etc |
| Temp range
-55°C to +760°C (1400°F) |
Coats gaskets
in high temperature applications |
| Prevents
galling, seizure and corrosion under extreme heat - even in acidic
environments |
Coats pump/pipe
flanges in chemical plants |
| Maximum
resistance to acids, ammonia, acetylene and vinyl monomer |
Lubricates
conveyor chains, oven doors and slow moving bearings |
| |
Suited for
hot corrosive environments, eg: oil refineries, bitumen plants,
sewerage treatment plants. |
Contact:
Phone: 08 89721988 or
Email: parts@bcmachinery.com.au
Back
to the Top...
|
|
CONTENT
DISCLAIMER
The information contained within BC Machinery on line has been derived
from various competent sources and has been checked and authorised by
Baynes Pty Ltd T/A BC Machinery prior to publication. Whilst every care
has been taken in the preparation of the site content, Baynes Pty Ltd
T/A BC Machinery shall not be liable, either directly or in any consequential
way, for acts or omissions by any party in the direct or indirect use
of the information described herein.
Due to ongoing product development, Baynes Pty Ltd T/A BC Machinery reserves
the right to change without notice, any product details including specifications,
appearance and performance.
|
