We hold a large range of pins and linkages to suit all types of applications. The following are examples that we hold in stock or able to get them in for you. If you can't find it here please contact us and we will endeavour to find it for you.

Contact BC Machinery
Phone: 08 89721988
Email: parts@bcmachinery.com.au

Drawbar Pins- All pins are cold forged or machined down from solid bar to provide integral safety collar. Fitted with Lynch pin and chain assembly. Sizes range from ¾" (19mm) to 2" (50mm) Diameter and 3¾" (95mm) to 7¼" (185mm) in length.

Standard Bolt In Implement Mounting Pins - Cold forged pins ranging in sizes from 19mm to 28.6mm (Implement Hole Diameter). Pins can suit tractor linkage categories from CAT I to CAT III. Also available in various side are weld in & non standard lower Implement Mounting Pins.

---

Standard Single Category Pins & Dual Category Lower
Pins - are available in different sizes and to suit different
tractor linkage categories.

 

 

Top Link Pins - Sizes range in diameter from 16mm to 31.75mm and 76mm to 137mm useable length. Pins can suit tractor linkage categories from CAT I to
CAT III. Minimum Steel Spec IS S1040 - Zinc Plated.

To the top...

For further information contact BC Machinery
Phone: 08 89721988
Email: parts@bcmachinery.com.au

---

Linkage Conversion Bushes - To convert CAT I pins to CAT II pins and CAT II to CAT III pins. Bushes come in various sizes to suit top link pins with ID 19mm and 25.4mm and Lower Link Pins with ID 22mm and 28.6mm.

Weld On Ball Ends -Ball ends are ideal for repair to tractor lower links. Ball Ends are available with a narrow shank, wide shank and round shank.

 

 

To the top..

---

Top Links - Standard Top links are suitable for tractors up to 50hp but are not to be used with rippers. Heavy duty Top links are suitable for most CAT II tractors.

Tow Balls - Forged from carbon steel. Branded to meet Australian standards. Supplied with a nut & spring washer.

To the top...

For further information contact BC Machinery
Phone: 08 89721988
Email: parts@bcmachinery.com.au

---

Universal Stabilisers - Suits MF. TE20-MF35-135-148-(MF165-168-175-185 with thin type stay bars). Adjustable range 65cm to 89cm. Large diameter 7/8" UNF thread.

Universal Stay Chains - Heavy duty chain. suits most CAT I tractors. Eye 22mm adjustable range 4cm to 90cm.

To the top..

---

Linch Pins - Standard Linch Pins 3.6mm Wire Diameter. Pin diameters range in sizes from 4.5mm to 11mm.

Iron Man Super Linch Pin - 5mm wire diameter and 11mm pin diameter.

 

To the top..

---

For further information contact BC Machinery
Phone: 08 89721988
Email: parts@bcmachinery.com.au

Linch Pin and Chain Assembly - 25cm long chain fitted with a 28 diameter ring and 11mm pin diameter.

 

R Clip - range in sizes from 2mm wire which suits shaft sizes 6mm - 11mm, to 7mm wire which suits shaft sizes 25-38mm.

To the top..

---

Shaft Locking Pins - Lock pin suitable for shafts to 51mm diameter. Spring locks securely over the end of the pin.

 

 

Cotter Pins - come in various sizes ranging from 2 mm x 40 to 8mm x75.

To the top..

 

For further information contact BC Machinery
Phone: 08 89721988
Email: parts@bcmachinery.com.au

---

.